>> الأحداث والأخبار >> اخبار الصناعة
The mixing station needs to pay attention to those problems in the work process?
The mixing station needs to pay attention to those problems in the work process?
The stable machine device is not less than the road construction or construction. Then we need to pay attention to that way? Tips If the situation is more urgent, I must choose to go directly, and contact the manufacturer to solve. Avoid unnecessary hazards.
1. Stable soil mixed station motor drive belt is too loose: the motor drive belt is too loose, resulting in insufficient driving force, which will also cause stable soil mixing stations to stop rotation or slow, so it is necessary to stop adjusting the tension of the belt. Spend.
2, stabilize the soil mixer station seriously overload: Stabilizing the soil mixture agitator axis exceeds the normal working load, the stirring axis will rotate slowly, if the load is too large, it will cause the agitating shaft to stop. Therefore, the operator should adjust the amount of feed, unload excess material, and reduce the agitation axis rotation load.
3, stabilizing the soil mixing station mixing blade or side blade and the inner wall between the cans: This situation can cause the agitation shaft to stop, and the album is used, which is due to stabilizing the soil mixed station to stir the blade or side blade. It is caused to the interior wall gap. When this happens, it is necessary to stop checking immediately, manually excluding foreign matter, re-adjusting the stable soil mixed station stirring blade or gap between the side blades and the inner wall.
