>> الأحداث والأخبار >> اخبار الصناعة
How should the pipeline of the mixing pump be fixed?
How should the pipeline of the mixing pump be fixed?
The mixing trailer pump is a concrete pump specially designed for small civil buildings. It has a very high degree of automation. It integrates feeding, mixing, and high-pressure pumping, which can save a lot of labor costs; simple operation, stable performance, and widely used in various Large rural and urban areas.
The conveying method of the mixing pump is carried out through the pipeline, so the installation of the mixing pump pipeline is very important. The pipeline layout should be arranged according to the principle of the shortest distance and the least elbow, which is to reduce the resistance of pumping concrete. Prevent blockage. The piping should also be arranged in a place easily accessible by personnel for the replacement and cleaning of the conveying piping.
In addition, the fixing of the mixing and dragging pump pipeline is also extremely important. If the pipeline of the concrete mixing pump is not firmly fixed, it may affect the construction and even lead to safety accidents. Then, how to fix the pipeline of the mixing pump?
1. The conveying pipe of the mixing pump shall not be directly supported on the steel bars, formwork and embedded parts;
2. The horizontal conveying pipe of the stirring pump should be fixed with brackets, table pads, spreaders, etc. at certain distances, so as to eliminate blocked pipes, assemble and disassemble and clean the pipes;
3. The vertical conveying pipe of the mixing pump should be fixed on the wall and column with embedded parts, or leave a hole at the top of the floor;
4. Each tube on the wall and column must be fixed once at a distance, but not less than one fixed point; at the same time, it should be fixed at the reserved holes of each floor slab;
5. The elbow at the lower end of the vertical pipe of the stirring pump should not be used as the support point of the upper pipe, and steel supports should be provided to bear the weight of the vertical pipe;
6. When the vertical pipe of the mixing pump is fixed on the scaffolding, the scaffolding can be reinforced as required; the pipe joint clamp shall not leak slurry.
