Concrete pump car many people have seen,because many urban construction have the use of the equipment,it is the use of pressure will be continuous transmission of concrete through the pipeline,the composition is very simple,including the pump body and pipe.

　　Concrete pump truck operation is very simple,through the electric control device to operate,sanmin heavy remind,but in the process of operation should also pay attention to some matters,to avoid safety risks.

　　First,the user should be clear that the equipment is only the transport of concrete equipment,if the transport of other substances are dangerous;

　　Second,the height and distance of the concrete pumped by the pump truck and the boom are strictly calculated,and confirmed by repeated tests.Any modification and extension are dangerous;

　　Third,privately modified pressure and running speed,or increase the diameter of the conveying pipe,etc.,also have the use of safety risks;

　　Fourth,without permission to change control procedures or control lines,will also affect the use of safety;

　　Fifth,operators should be equipped with protective equipment,including safety hats and gloves;

　　Sixth,the pump truck support must be level with the ground,the support surface area should be large,keep enough safe spacing,deflection Angle can not exceed 3 degrees;

　　Seventh,the extension boom can only be operated after determining the stability of the support.Do not use it in bad weather.At the same time,the operation of the boom must be in the field of vision of the operator.

　　In addition,when the pump truck is running,it is not possible to open the safety protection facilities privately,such as shaking screen,water tank cover plate,etc.,but it is not possible to put your hand into these places.In short,the operation of concrete pump truck should pay attention to many steps,be sure to read the manual and precautions.

• Concrete mixing station type
• How much is the investment in concrete batching plant